Only focus on the cup mask machine research and development and manufacturing
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Supply Ability:||4 set per month|
|Name:||Automatic N95 Earloop Mask Machine||Automatic Grade:||Automatic|
|Warranty:||1 Year||Application:||Surgical Face Mask|
|Material:||Nonwoven Fabric||Voltage:||AC220V 50-60HZ|
|Production Efficiency:||30-40 Pieces / Min||Power:||10KW|
fully automatic mask making machine,
automatic facial mask machine
Automatic N95 Earloop Mask Machine AC220V 50-60HZ With Pulleys And Fixed Feet
What is automatic face mask making machine
We know that the medical mask is composed of the mask body and ear band, the traditional medical mask machine is made of a machine that produces the mask body, which is then welded by the inner/outer ear loop welding machine. In order to realize the perfect cooperation between the machine and the automatic weld ear loop, also achieve maximum efficiency of the production line, we need to link one mask blank machine and one ear loop welding machine work together.
high-speed full-automatic one-tow-two mask machine is mainly composed of the body machine, the flap conveying line and two ear band welding machines.After the machine outputs the mask body, the conveyor belt structure transmits the mask body piece to the turnover mechanism. The mask disc is flipped onto the conveyor belt connected to the ear strap machine by a flip mechanism, then the mask sheet will be transported to the front of the ear belt machine above the mask plate through the conveyor belt, place the mask sheet into the mask plate of the earband machine by pressing down the cylinder, subsequent welding of the ear bands of the mask by the ear band machine, to complete the production of a flat outer ear mask product, the layout of the automatic line is as follows,the whole line is one - tow - two structure.
1. Aluminium alloy structure is adopted, which is beautiful and firm without rust.
2. Computer PLC (Mitsubishi PLC) programming control, high stability, low failure rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high precision.
4. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
5. The machine adopts pulleys and fixed feet, which is convenient and fast to move, strong fixation, and does not shake.
1. The size of the machine is long, wide and high: the size of the whole machine is one according to the actual 1050cm * 150cm * 180cm
2. Voltage: AC220V 50-60HZ
3. Production efficiency: 30-40 pieces / min
4. Power: 10KW
Imput raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation
|1||size||1050 (length) * 150 (width) * 180 (height)|
|2||Weight||weight ≤1500KG Ground load 350KG / ㎡|
|3||Color||Color Sheet metal warm gray 1C, primary color of aluminum profile|
|4||Working power supply||220VAC ± 5% 50HZ grounding protection rated power ≤10KW (including welding machine)|
|5||Compressed air||0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min|
|6||Production efficiency||30-40PCS / min (according to the actual debugging effect)|
|7||Product qualification rate||99% (except for the original material and human operation)|
|8||Main accessories||Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie|
|9||Operating environment||General workshop environment is acceptable (no corrosive odor, no dust)|
Equipment use matters needing attention:
The machine should be installed on a flat and solid ground, and sufficient operation and maintenance space should be reserved around the machine
1. Temperature: The normal ambient temperature must be 5°C ~ 40°C.
2. Humidity: 30% ~ 90%.
3. Keep away from paint (gasoline), chemicals, acid, alkaline and explosive or flammable materials.
4. Avoid neighbouring machines that can cause vibration. Ambient lighting: above 300LUX
1. After the machine is positioned, adjust the foot cup of the machine and use the horizontal auxiliary tool until it is adjusted to the level.
2. Connect the power cord. This machine uses 220V single-phase, 50HZ power. It is strictly prohibited to connect 380V or other power sources that do not meet the requirements. Please pay special attention to the user! To ensure safety, the connection work must be completed by an electric professional, and a connection cable is provided. If self-equipped power plug is used, 2.5mm2 three-core cable must be used to correctly connect live wire (L), neutral wire (N) and ground wire (E).
Contact Person: jzer