N95 Earloop Mask Making Equipment With Nonwoven Fabric Raw Material
One-to-two flat mask equipment is the special equipment for the production of disposable
Flat masks. It consists of 1 body machine and 2 ear band welding machines. It can automatically complete the mask body molding,automatic nose bridge reinforcement, and automatic ear band welding.
Face Mask Manufacturing Machine Features:
1. It uses aluminum alloy structure, which is sleek, solid and rustless.
2. This model is equipped with new advanced conveyor belt, which automatically collects products with high accuracy, so the work need to do is collection and packing only.
3. Photoelectric detection of raw materials prevents errors and reduces waste
4. Servo motor and step motor drive, high precision.
5. The machine mount uses pulleys and fixed feet, which is easy and fast to move, strong in stability, and does not shake.
6. Computer PLC control, high stability, low failure rate and low noise.
7. The equipment can be modified according to product requirements, product size, length and thickness.
Imput raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation
1. The size of the machine is long, wide and high: the size of the whole machine is one according to the actual 1050cm * 150cm * 180cm
2. Voltage: AC220V 50-60HZ
3. Production efficiency: 30-40 pieces / min
4. Power: 10KW
||1050 (length) * 150 (width) * 180 (height)
||weight ≤1500KG Ground load 350KG / ㎡
||Color Sheet metal warm gray 1C, primary color of aluminum profile
||Working power supply
||220VAC ± 5% 50HZ grounding protection rated power ≤10KW (including welding machine)
||0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min
||30-40PCS / min (according to the actual debugging effect)
||Product qualification rate
||99% (except for the original material and human operation)
||Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie
||General workshop environment is acceptable (no corrosive odor, no dust)
Equipment use matters needing attention:
The machine should be installed on a flat and solid ground, and sufficient operation and maintenance space should be reserved around the machine
5.1 Environmental conditions
1. Temperature: The normal ambient temperature must be 5°C ~ 40°C.
2. Humidity: 30% ~ 90%.
3. Keep away from paint (gasoline), chemicals, acid, alkaline and explosive or flammable materials.
4. Avoid neighbouring machines that can cause vibration. Ambient lighting: above 300LUX
5.2 Installation notes
1. After the machine is positioned, adjust the foot cup of the machine and use the horizontal auxiliary tool until it is adjusted to the level.
2. Connect the power cord. This machine uses 220V single-phase, 50HZ power. It is strictly prohibited to connect 380V or other power sources that do not meet the requirements. Please pay special attention to the user! To ensure safety, the connection work must be completed by an electric professional, and a connection cable is provided. If self-equipped power plug is used, 2.5mm2 three-core cable must be used to correctly connect live wire (L), neutral wire (N) and ground wire (E).