20PCS/Min Max Nonwoven Niosh N95 Cup Mask Machine

10 - 20 PCS/Min Nonwoven Noish N95 Automatic Cup Mask Making Machine

1 . Descriptions:

• Cup Face Mask Making Machine is fully automated, with a production speed of 10-20PCS per minute, and can be produced without shutdown during feeding.
• Automatic paste sponge strip, accurate and beautiful position.
• Automatic Cup Face Mask Making Machine​ is easy to maintain, modular design, can be quickly spliced, to achieve rapid production.
• N95 Cup Face Mask Making Machinesize is small, 3000*2000*1800/3000*1500*1800mm covers an area of less convenient air transport.
• Each module can be used separately, free combination.

• the processing workpiece aluminum alloy hard oxygen processing, the frame adopts castiron welding , baking paint, beautiful, solid and not rust.
• PLC(Mitsubishi PLC) programming control, high stability, low failure rate, less noise

2 . Specifications:

Advantage:

 
European standards committee issued the certification standard of respiratory protective gear. The standard is that the granular material is divided into solid particle protection and liquid particle protection, respectively with NaCl (sodium chloride) and DOP (paraffin oil) aerosol test and classification. According to the tested particle penetration rate, qualified solid particle protection filter material is divided into three levels: P1FP1, P2 (FP2) and P3 (FP3), among which P3 has the best protection performance, while P1 has the lowest protection performance. Liquid particle protection filter material is divided into two levels, P2 and P3, the protection performance of P3 is higher than that of P2. According to the EN149 standard certified by C, masks are defined as three types according to the filtering effect: FP1 filters at least 80% of the particles; FP2 filters at least 94% of the particles; FP3 filters at least 99% of the particles.
 
European standard EN 149:2001 +A12009 for dust mask
 
Penetrationra
 

 
Respiratory resistance

 
Features
 
1. The advantage of the original cold press melt blow molding technology is that the low temperature does not change the chemical composition and physical structure of the material, so our machine can use ffp3 material to make ffp3 masks
 
2. The volume of N95 Automatic Cup Mask Making Machine is small, accounting for only 55%, which greatly reduces the space and saves costs
 
And there is no need to disassemble during air and sea transportation, saving 50% of freight
 
3. The efficiency of the N95 automatic cup-shaped mask machine of the peer product is only less than 10 pieces per minute, while the production efficiency of our cup-shaped mask machine can reach 10-20 pieces per minute, and the production efficiency has increased by 100%. This cup-shaped mask machine is three types compared to other mask machines

The fully automatic inner ear mask machine uses ultrasonic welding

When the mask is moved to the processing position, ultrasonic waves are automatically generated, forming micro-amplitude and high-frequency vibration on the earband, which is instantly converted into heat, melting the material to be processed, and finally The ear straps are permanently pasted or embedded inside the mask body, which is the last processing process of the inner ear strap mask production. Only one operator is required to place the mask body piece by piece in the mask tray. The subsequent actions are automatically completed by the equipment until the finished product is completed. operating.