Only focus on the cup mask machine research and development and manufacturing
 |
| Place of Origin: | China |
| Brand Name: | JZer |
| Certification: | CE ISO |
| Minimum Order Quantity: | 1 set |
|---|---|
| Price: | Negotiable |
| Packaging Details: | wooden case |
| Payment Terms: | Negotiable |
| Supply Ability: | 4 set per month |
| Type: | 2AT.JZKZHRDBZD-A | Size: | 700 (length) * 600 (width) * 1500 (height) |
|---|---|---|---|
| Compressed Air: | 0.4-0.6MP | Production Efficiency: | 20-40PCS/min |
| Product Qualification Rate: | 99% (except For The Original Material And Human Operation) | Main Accessories: | Cylinder: AirTAC Screw Guide Rail: HIWIN / TBI PLC: Mitsubishi Or Xinjie |
| High Light: | 40 PCS/min Face Mask Making Machine,FFP3 Cup Mask Machine Automatic,High Speed FFP3 Cup Mask Machine |
||
High Speed Stable Automatic Ffp3 Cup Type Face Mask Making Machine
0.4-0.6MP Face Mask Sealing Machine Semi Auto Face Mask Machine
This equipment solves the defects of the current fully automatic line, difficult to operate, high defect rate, etc., only one person is required to use the equipment, the foot switch type is adopted, the equipment automatically depresses the ultrasonic wave, the manual alignment is accurate, convenient, automatic welding, quickly meet the product quality requirements .
The principle of ultrasonic spot welding is to convert the 50/60Hz current into 15/ 20/ 30 or 40KHz electric energy through the ultrasonic generator. The converted high-frequency electrical energy is converted through the transducer again into mechanical motion of the same frequency, which is then transmitted to the welding head through a set of amplitude modulation devices that can change the amplitude. The welding head transmits the received vibration energy to the joint of the workpiece to be welded, where the vibration energy is converted into heat energy by friction to melt the plastic. The transient pressure maintained on the workpiece after the vibration stops solidifies the two welds in the way of molecular linkage.
Generally, the welding time is less than 1 second, and the obtained welding strength is comparable to the body. Ultrasonic spot welders can be used not only to weld hard thermoplastics but also to process fabrics and films. The main components of an ultrasonic welding system include an ultrasonic generator, a transducer/amplitude modulation/welding head triplet, a mold, and a frame.
Product Features
1. Adopt open design, good window.
2. Man-machine combination, debugging and easy maintenance.
3. Easy to operate, low cost, strong and durable.
| No. | Name | Parameter |
| 1 | Type | 2AT.JZKZHRDBZD-A |
| 2 | Size | 700 (length) * 600 (width) * 1500 (height) |
| 3 | Weight | Total equipment weight ≤200KG Ground load 200KG / ㎡ |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dehydration, no oil, filtration, pressure stabilization), use flow rate is about 300L / min) |
| 6 | Production efficiency | 20-40PCS/min |
| 7 | product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Contact Person: jzer
